Micom P634 - Page 696

Parameter Address
Default Min Max Unit Logic Diagram
Over-/
underfrequency pro‐
tection
f<>: Reset meas.val. USER
003 080
0: don't execute
[spacer]
Resetting the measured event values f<>: Max. frequ. for
f> and f<>: Min. frequ. for f<.
Parameter Address
Default Min Max Unit Logic Diagram
Overfluxing protec‐
tion
V/f: Reset replica USER
035 183
0: don't execute Fig. 3-148, (p. 3-195)
Parameter Address
Default Min Max Unit Logic Diagram
Current transformer
supervision
CTS: Reset latch. USER
036 157
0: don't execute Fig. 3-154, (p. 3-200)
Parameter Address
Default Min Max Unit Logic Diagram
Circuit breaker
failure protection
CBF_1: Enable USER
003 016
0: don't execute Fig. 3-159, (p. 3-205)
[spacer]
Circuit breaker failure protection is enabled from the local control panel.
[spacer]
CBF_1: Disable USER
003 015
0: don't execute Fig. 3-159, (p. 3-205)
[spacer]
Circuit breaker failure protection is disabled from the local control panel.
Parameter Address
Default Min Max Unit Logic Diagram
Circuit breaker
failure protection
CBF_2: Enable USER
003 124
0: don't execute
[spacer]
CBF_2: Disable USER
003 123
0: don't execute
P634 8 Information and Control Functions
8-158 P634/EN M/R-42-A // P634‑311‑653