EasyManua.ls Logo

MICRO-EPSILON optoNCDT 2300 - Page 86

MICRO-EPSILON optoNCDT 2300
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 86
Digital Interfaces
optoNCDT 2300
Exposure time
The exposure time is transmitted with each displacement value.
Bit 31 ... 17 16 ... 0
Reserved
Exposure time, step size 12.5 ns
Value range: 12.5 ns ... 1.3107 ms
If the exposure time is transmitted via the RS422, only bit 0 ... 16 is transmitted.
Measured value counter
The measured value counter allows the assignment of the video signal.
Bit 31 ... 24 23 ... 0
In case of the measured value counter is transmitted via the RS422, only bit
0 ... 17 is transmitted; so the counter is limited to 262143 values. Then the mea-
sured value counter starts again with 0.
Reserved Counter
Time stamp
Transmission of the time stamp as a 32 bit value. The resolution is 1 µs.
Bit 31 ... 0
In case of the time stamp is transmitted via the RS422, only bit 8 ... 25 are transmitted.
The resolution is then 0.25 ms.
Time stamp
Temperature
10-bit integer with the correct sign extended to 32 bits, resolution 0.25 ° C.
Temperature DB9 . . . DB0
–128 °C 10 0000 0000 –50 °C 11 0011 1000 +0.25 °C 00 0000 0001 +75 °C 01 0010 1100
–125 °C 10 0000 1100 –25 °C 11 1001 1100 +10 °C 00 0010 1000 +100 °C 01 1001 0000
–100 °C 10 0111 0000 –0.25 °C 11 1111 1111 +25 °C 00 0110 0100 +125 °C 01 1111 0100
–75 °C 10 1101 0100 0 °C 00 0000 0000 +50 °C 00 1100 1000 +127 °C 01 1111 1100
The temperature range is limited to -55 ° ... +127 °C. The operating temperature of the sensor is 0 ... +50 °C.

Table of Contents

Related product manuals