DCS Command System User’s Guide
Trouble-Shooting
139
STEP IV - Operating Issues while running a Lash-up
A. Whenever an operating problem occurs when running a lash-up, check the TIU and
Remote code revisions. The code revision in the TIU and Remote must match. Power
up the remote by pressing the S5 On/Off button on the remote. Record the Remote
code Version ## displayed in the LCD screen as the remote powers up.
B. Power up the TIU by turning on a transformer hooked to the fixed input 1 channel
or AUX power. Using the Remote, select Menu, System, TIU Set-up, TIU Version to
display the TIU code revision. Compare the Remote and TIU code version, they must
match. If they do not or there is a later version, go to M.T.H’s website and download
new code. See DCS Dealer Loader Instruction on the PS2 section of the M.T.H’s
Website by selecting the PS2 icon on the lower section of the homepage.
To Next Page
Loading...
