DCS Command System User’s Guide
Menu Operations - Systems
Engine Setup: (cont’d)
Add Engine
Add TMCC Engine
1. The LCD prompts you to name the
engine, and an alphanumeric character set
is displayed. Use the thumbwheel to
scroll through the character set, and when
the character you want to type next is
bracketed, press the thumbwheel to select
it. You may give the engine a name up to
16 characters long. Select the “D” at the
end of the character set to signify that you
are done with this function.
2. The LCD prompts you for the engine’s
TMCC number. Enter the number you
previously assigned the engine when you
entered it into the TMCC Command Base
(the address you use to address the engine
when you run it with the Cab 1®). This
number is unrelated to the number DCS
assigns the engine in the DCS engine list.
3. Next, select the TIU Address that is
connected to the TMCC Command Base.
58
To Next Page
Loading...
