►
To adjust the Nudge Grid, right-click ([Ctrl]-click on Mac OS X) on the background of the
Event area, select Nudge Grid in the menu, and choose a resolution from the values avail-
able in the submenu: Step, Step/2, Step/4, Step/8, and Step/16:
The Nudge Grid is not indicated in the Event area of the Pattern Editor.
Adjusting the Step Grid and the Nudge Grid on Your Controller
You can enable/disable the Step Grid and adjust the Step Grid and Nudge Grid resolution from
your controller.
Enabling or Disabling the Step Grid
To enable or disable the Step Grid:
1. Hold GRID to enter Grid mode. You can also pin Grid mode in order to keep it active when
you release GRID (see ↑2.3.6, Pinning a Mode on Your Controller).
2. Press F3 (STEP) to access the Step and Nudge Grid settings.
Working with Patterns
Pattern Basics
MASCHINE MIKRO - Manual - 325
To Next Page
Loading...
