Native Instruments Maschine MIKRO User Manual

▪ The Pattern displays its name and color.
▪ The corresponding Pattern will now be played by that Scene.
▪ Additionally this Pattern is loaded in the Pattern Editor, ready to be modified.
Patterns and the Pattern Editor are described in chapter ↑7, Working with Patterns.
Creating a New Empty Pattern in Ideas View
You can also create a new empty Pattern in Ideas view:
►
In the Ideas view, double-click the empty Pattern slot located in the column of the de-
sired Group.
→
A new empty Pattern is created.
Removing a Pattern in Ideas View
You can also remove a Pattern from a Scene in Ideas view:
►
Click the highlighted Pattern for any Group to remove it from the Scene.
→
The Pattern is removed from the Scene:
▪ The corresponding Pattern will not be played by that Scene anymore.
▪ The Pattern itself is left untouched.
Assigning a Pattern on the Controller
Assigning a Pattern is done in Pattern mode.
First select the Scene in which you want to assign a Pattern:
1. Press and hold SCENE to enter Scene mode.
2. Press SHIFT + Left/Right Arrow buttons to select the desired Scene bank.
3. Press the pad corresponding to the Scene in which you want to create a Pattern.
Then create the Pattern for the desired Group:
Working with the Arranger
Using Ideas View
MASCHINE MIKRO - Manual - 712

Native Instruments Maschine MIKRO Specifications

General

Brand	Native Instruments
Model	Maschine MIKRO
Category	Telephone
Language	English