5-14 Installing the Operating System with Express Setup
Network Driver
Specify the details of the network driver.
The standard network driver that is mounted will be installed automatically, but the link speed and Duplex mode need to
be specified manually.
[When PROSet is not installed]
1. The [Local Area Connection Properties] dialog box appears.
* The procedure in the case of the standard start menu
1. Click Start menu, Click [Control Panel], Click [Network Connections], and Click [Local Area
Connection].
* The procedure in the case of the classic start menu
1. Click Start menu, Click [Settings] and Click [Network Connections].
The [Network Connections] dialog box appears.
2. Right-click [Local Area Connection] and click [Properties] from pop-up menu.
2. Click [Configure].
The property dialog box for network adapter appears.
3. Click the [Advanced] and specify for the [Link Speed & Duplex] value the same as specified for HUB.
4. Click [OK] on the property dialog box for network adapter.
[When PROSet is installed]
1. The [Intel(R) PROSet for Wired Connections] dialog box appears.
* The procedure in the case of the standard start menu
Click Start menu, point to [Control Panel] and click [Intel PROSet].
* The procedure in the case of the classic start menu
1. Click Start menu, point to [Settings] and click [Control Panel].
2. Double-click [Intel(R) PROSet Wired] on the [Control Panel] window.
2. Click [(Network Adapter Name)] in the list.
3. Click the [Speed] and specify the [Link Speed & Duplex Settings] value the same as the value specified for
HUB.
4. Click [Apply] and click [OK].
Also, add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which can be appeared from [Network
and Dial-up Connection].
NOTE: We recommend you add [Network Monitor] at [AddingServices]. [Network
Monitor] can monitor the frame (or the packet) that the computer installing [Network
Monitor] sends or receives. This tool is valuable when analyzing network trouble. For
information on how to install the tool, see the "Setting for Solving Problems" described
later in this chapter.
To Next Page
Loading...
Need help?
General
