Installing the Operating System with Express Setup 5-47
HostRAID Setup Flow
The flowchart below shows the HostRAID system setup procedure.
Start
Enable the HostRAID
feature and create RAID by
using BIOS setup utility
Refer to Chapter 4
*1
.
Install driver
(install OS).
See Appendix D of this
guide.
Update system.
See this chapter.
Install ASM.
See ASM User's
Guide
*2
.
Install Standby/Hibernation
Lock driver.
See appendix of ASM
User's Guide
*2
.
End
*1 You can create RAID by using the EXPRESSBUILDER. In this case, only you need to do is to set the HostRAID feature to
"Enabled" by using BIOS setup utility.
*2 ASM User's Guide: Adaptec Storage Manager
TM
User's Guide.
You may view or print the Adaptec Storage Manager™ User's Guide from the EXPRESSBUILDER CD-ROM.
To Next Page
Loading...
Need help?
General
