5-42 Installing the Operating System with Express Setup
Network Monitor
Using Network Monitor helps you to investigate and manage with network trouble. To use Network Monitor, you need
to restart the system after the installation has completed, so we recommend to install Network Monitor before any
network trouble may occur.
1. Point to [Settings] from Start menu and click [Control Panel].
The [Control Panel] dialog box appears.
2. Double-click [Add/Remove Programs].
The [Add/Remove Programs] dialog box appears.
3. Click [Add/Remove Windows Component].
The [Windows Components Wizard] dialog box appears.
4. Check the [Management and Monitoring Tools] check box of the component ON and click [Next].
5. If the setup asks to install the disk, insert Windows 2000 CD-ROM into the CD-ROM drive and click [OK].
6. Click [Complete] in the [Windows Component Wizard] dialog box.
7. Click [Close] in the [Add/Remove Application] dialog box.
8. Close the [Control Panel] dialog box.
To start Network Monitor, point to [Program] → [Administrative Tools] and click [Network Monitor]. For information
on how to operate Network Monitor, refer to Online Help.
Installing Maintenance Utilities
Various maintenance utilities are included in your EXPRESSBUILDER CD-ROM. See Chapter 6 for installing the
utilities to your server or management workstations.
To Next Page
Loading...
Need help?
General
