Installing the Operating System with Express Setup 5-41
Windows 2000 Dr. Watson
Windows 2000 Dr. Watson is a debugger for application errors. If any application error is detected, Dr. Watson
diagnoses the server and logs diagnostic information (log). Follow the procedure below and specify Dr. Watson to
collect diagnostic information.
1. Click [Run] on Start menu.
2. Type "drwtsn32.exe" in the [Open] box, and click [OK].
The [Dr. Watson for Windows 2000] dialog box appears.
3. Specify the location to store the diagnostic information in the [Log File Path] box.
The diagnostic information will be stored with the file name "DRWTSN32.LOG".
NOTE: You cannot specify a network path. Specify a path on the local computer.
4. Specify the location of crash dump file in the [Crash Dump] box.
NOTE: the "Crash Dump File" is a binary file that can be read with Windows Debugger.
5. Check the following check box on the [Option] box.
Dump Symbol Table
Dump All Thread Contexts
Add To Existing Log File
Create Crash Dump File
For more information on each function above, refer to Online Help.
6. Click [OK].
To Next Page
Loading...
