Upgrading Your Server 9-29
File Device
CAUTION
The qualified service representative can only install or remove the components
described in this subsection. To avoid personal injury or electrical shock, contact
your service representative when your need to install/remove the internal
components.
The server has two slots on which backup devices including DVD-RAM, MO, and magnetic tape drives are installed
(the factory-installed CD-ROM drive occupies another slot).
NOTES:
If a SCSI device is installed, the optional SCSI controller board and internal SCSI cable
are required. See Chapter 10 for details.
To install the optional IDE device, move the CD-ROM drive to additional slot 1. Then,
install the IDE device instead.
– Factory-installed CD-ROM drive: master (factory default)
– Optional IDE device: slave
To Next Page
Loading...
