Installing the Operating System with Express Setup 5-21
Network Monitor
Using Network Monitor helps you investigate and manage network troubles. To use Network Monitor, you need to
restart the system after the installation has completed, so we recommend you install Network Monitor before any
network trouble occurs.
1. Point to [Settings] from Start menu and click [Control Panel].
The [Control Panel] dialog box appears.
2. Double-click [Add/Remove Programs].
The [Add/Remove Programs] dialog box appears.
3. Click [Add/Remove Windows Component].
The [Windows Components Wizard] dialog box appears.
4. Check the [Management and Monitoring Tools] check box of the component ON and click [Next].
5. If prompted to do so, insert Windows Server 2003 CD-ROM into the CD-ROM drive and click [OK].
6. Click [Complete] in the [Windows Component Wizard] dialog box.
7. Click [Close] in the [Add/Remove Application] dialog box.
8. Close the [Control Panel] dialog box.
To start Network Monitor, point to [Program] → [Administrative Tools] and click [Network Monitor]. For information
on how to operate Network Monitor, refer to Online Help.
Installing Maintenance Utilities
Various maintenance utilities are contained in your EXPRESSBUILDER CD-ROM. See Chapter 6 for installing the
utilities to your server or management workstations.
To Next Page
Loading...
