6-10 Installing and Using Utilities
CONFIGURATION DISKETTE CREATOR
"Configuration Diskette Creator" is a tool to create [Configuration Diskette] that is used for configuring the server with
the Express Setup (see Chapter 5 for details).
If you use the Configuration Diskette created by the Express Setup and Configuration Diskette Creator to operate the
setup, you can setup from the installation of OS to several utilities automatically except for a few key input to confirm
the specification. Also, you can install the system with the same specification as before when re-installing the system.
We recommend you to create [Configuration Diskette] to setup the servers from EXPRESSBUILDER.
IMPORTANT: You can not create [Configuration Diskette] for Microsoft Windows
Server 2003 x64 Editions.
NOTE: You can install Windows Server 2003 and Windows 2000 without [Configuration
Diskette]. Also, you can modify/newly create [Configuration Diskette] during the setup
with EXPRESSBUILDER.
Creating Configuration Diskette
This section describes about specifying setup information that is necessary for OS installation and creating
[Configuration Diskette]. Follow the procedure below.
NOTE: In the procedure below, the folder name that is specified when installing Trekking
command is assumed as [Configuration Diskette Creator].
1. Start the OS.
2. Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive.
Master Control Menu will appear.
3. Right-click on the screen or left-click [Software Setup]. The menu will appear.
4. Click [Configuration Diskette Creator].
Configuration Diskette Creator window is displayed.
5. Click [Create New Information files] from the [File] menu.
To Next Page
Loading...
Need help?
General
