Installing the Operating System with Express Setup 5-43
Updating the System - Installing Service Pack -
IMPORTANT: Installing ServicePack 4 is mandatory. If you use the Windows 2000
CD-ROM which contains ServicePack 4 to setup your system, you do not have to apply
Service Pack 4 again.
Update the system when confronted with one of the situations below:
îš„ Modified system configuration.
îš„ Recovered the system using recovery process.
Log on to the system with the account that has administrative authority (e.g. Supervisor) and insert the
EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.
[Setup Software] in [Master Control Menu] screen appears, so left-click the item. Click [Update the System] from the
menu and the setup will start. After that, follow the on-screen messages to continue the setup process and apply the
Service Pack.
Making Backup Copies of System Information
The system information includes the current BIOS settings and any specific information for the server.
Save the information after completing the system setup.
Without the backup data, you will not be able to recover the information.
You can save the information by the following process.
1. Insert the EXPRESSBUILDER CD-ROM in the CD-ROM drive and reboot the system.
2. Select [Tools].
3. Select [Off-line Maintenance Utility].
4. Select [System Information Management].
5. Insert a floppy disk into the floppy disk drive.
6. Select [Save].
To Next Page
Loading...
Need help?
General
