F-2 Installing Windows 2000
Re-installing to the Hard Disk which has been upgraded to Dynamic Disk
If you want to leave the existing partition when installing the system on the hard disk upgraded to Dynamic Disk, note
the following issue:
îš„ Do not select the partition that OS had been installed as the partition to install the OS newly.
îš„ Select "Use the current File System" for the format of OS partition.
MO Device
If you specify the file system as NTFS with MO Device connected during the installation, the file system will not be
converted normally. Disconnect MO Device and restart the installation from the beginning.
Media such as DAT
During the OS installation, do not attach the unnecessary media for OS installation to the system, such as DAT.
To Next Page
Loading...
Need help?
General
