Installing the Operating System with Express Setup 5-35
Installing and Setting Device Drivers
Follow these steps to install and configure the device drivers.
PROSet
PROSet is a utility that confirms the function of network contained in network driver. Be sure to install. Using PROSet
enables the following issues:
îš„ Confirm detailed information of the adapter.
îš„ Diagnose loop back test, packet transmission test and so on.
îš„ Specify teaming.
Configuring several network adapters as one team provides the server an environment tolerant on any trouble and
enhances throughput between the switches.
PROSet is necessary to use these features.
Follow the procedure below to install PROSet.
1. Insert the EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2. Click Start menu, point to [Program], [Accessory] and click [Explorer].
3. Run "DXSETUP.EXE" in the following directory.
<CD-ROM Drive Letter>:\WINNT\W2K\NS1\PROSET\2KXPWS03
The [Intel(R) PROSet - InstallShield Wizard] dialog starts.
4. Click [Next].
5. Choose "I accept the terms in the license agreement" and click [Next].
6. Choose "Typical" and click [Next].
7. Click [Install].
8. When [InstallShield Wizard Completed] window is displayed, click [Finish].
9. Restart the system.
To Next Page
Loading...
Need help?
General
