D-12 Installing Windows Server 2003 x64 Editions
* The procedure in the case of the standard start menu
1) Click Start menu, click [Control Panel], click [Network Connections], and click [Local Area
Connection].
* The procedure in the case of the classic start menu
1) Click Start menu, click [Settings] and click [Network Connections].
The [Network Connections] dialog box appears.
2) Right-click [Local Area Connection] and click [Properties] from pop-up menu.
2. Click [Configure].
The property dialog box for network adapter appears.
3. Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the value specified for HUB.
4. Click [OK] on the property dialog box for network adapter.
[When PROSet is installed]
1. The [Intel(R) PROSet for Wired Connections] dialog box appears.
* The procedure in the case of the standard start menu
Click Start menu, point to [Control Panel] and click [Intel PROSet].
* The procedure in the case of the classic start menu
1) Click Start menu, point to [Settings] and click [Control Panel].
2) Double-click [Intel(R) PROSet Wired] on the [Control Panel] window.
2. Click [(Network Adapter Name)] in the list.
3. Click the [Speed] and specify the [Link Speed & Duplex Settings] value the same as the value specified for
HUB.
4. Click [Apply] and click [OK].
Also, add or delete any protocols and services if necessary.
You can operate the process on the property dialog box for local area network which can be appeared from [Network
and Dial-up Connection].
NOTE: We recommend you to add [Network Monitor] at [Adding Services]. [Network
Monitor] can monitor the frame (or the packet) that the computer installing [Network
Monitor] sends or receives. This tool is valuable when analyzing network trouble. For
information on how to install the tool, see the "Setting for Solving Problems" described
later in this chapter.
Re-install the Network Driver
The network driver will be installed automatically.
Graphics Accelerator Driver
Standard graphics accelerator drivers that are mounted will be installed automatically. The following is the procedure
when it is necessary to install manually.
If you want to utilize optional Graphics Accelerator Driver board, follow the document attached to the board to install
the driver.
To Next Page
Loading...
Need help?
General
