5-16 Installing the Operating System with Express Setup
1. Start [Device Manager] from [Start] menu → [Control Panel]→ [Administrative Tools] → [Computer
Management].
2. Double-click on the SCSI Controller driver which the Device Manager lists as unknown device.
3. Click [Update Driver].
4. When the "Update Device Driver Wizard" appears, select "Install from a list or specific location [Advanced]"
and click [Next].
5. Select "Don't search. I will choose the driver to install" and click [Next].
6. Click [Have Disk..].
7. Insert "Windows Server 2003 OEM-DISK for EXPRESSBUILDER" into the floppy disk drive, enter "a:\"
into "copy manufacturer's file from:" and click [OK].
8. Specify the following driver and click [Next].
[Adaptec SCSI Card 29320ALP - Ultra320 SCSI] (When the Adaptec 29320 board is installed.)
The installation of the driver is completed.
Restart the system when prompted to do so.
To Next Page
Loading...
