Installing and Using Utilities 6-13
Installing Optional Mass Storage Driver
To install optional Mass Storage Driver that is supported by the Express Setup, follow the procedure below to create
[Configuration Diskette].
1. Display Configuration Diskette Creator window.
2. From the [File] menu, click [Create new information files].
[Disk Environment] dialog box will be displayed.
3. Specify each item and click on [OK].
The dialog boxes to specify setup information will be displayed in order, such as [Disk Environment] dialog
box.
4. Follow the message to specify each item on the dialog box and click on [Next].
NOTE: If you click on [Cancel], all the input value will be deleted.
5. When [User and application setup] is displayed, check [Apply OEM-FD for mass storage device].
6. When the [Save Setup Information] dialog box is displayed, confirm that the [Configuration Diskette] check
box is checked, and input file name for the Setup File in [File Name].
7. Insert the floppy disk formatted by 1.44MB into the floppy disk drive and click on [OK].
To Next Page
Loading...
Need help?
General
