7-10 Maintenance
7. Follow the Guide line shown in the bottom of the screen and press Esc to show the End user Menu shown
below.
Please choose a function by the arrow key and push Enter key.
Enduser Menu
eDoLi (TEst & Diagnosis On Linux) Ver001.00 (Build020901.1.1m)
<Test Result>
<Device List>
<Log Info>
<Option>
<Reboot>
<Test Result> shows the screen of the diagnosis completed aforementioned.
<Device List> shows the information of all the devices connected.
<Log Info> shows the log information and error messages of the diagnosis. it can be saved to a floppy
disk. To save the log information to a floppy disk, insert a formatted floppy disk to a floppy
disk drive and select <Save [F]>.
<Option> change where to output log
<Reboot> Restarts the server.
8. Select <Reboot> in the Enduser Menu above.
The server restarts, and EXPRESSBUILDER boot the system.
9. Exit the EXPRESSBUILDER, and remove the CD-ROM from the CD-ROM drive.
10. Turn off the server and unplug the power cord from the receptacle.
11. Reconnect all the LAN cables to the server.
12. Plug the power code.
This completes the System Diagnostics.
To Next Page
Loading...
