Troubleshooting 8-9
Error
code
Error message Recommended Action
02D1 System Memory exceeds the CPU's caching limit.
02F4 EISA CMOS not write able
02F5 DMA Test Failed
02F6 Software NMI Failed
02F7 Fail-safe Timer NMI Failed
Contact your service representative.
0BB0 SMBIOS – SROM data read error.
0BB1 SMBIOS – SROM data checksum bad.
Contact your service representative.
8100 Memory decreased in size Contact your service representative to
replace the DIMM in the relevant group.
None Expansion ROM not initialized – PCI Mass
Storage Controller in slot n (n: slot number)
Disable initialization of the optional
device expansion ROM by using the
BIOS SETUP utility (see Chapter 4).
To Next Page
Loading...
