Installing Windows Server 2003 E-9
9. If the optional board is installed, select the proper SCSI Adapter and press Enter.
– Adaptec Ultra320 SCSI Cards (WinXP/Server 2003 IA-32)
(When the Adaptec 29320 board is installed.)
– LSI MEGARAID Products for Windows 2003 (x86)
(When the SecuRAID 114 board is installed.)
Continue performing tasks according to the subsequent messages that appear.
10. Update the system.
11. Install the driver and make detailed settings.
– SCSI controller (Adaptec 29160)
If your system features this controller, following message often appears on the display during the upgrade
installation to Windows Server 2003.
Please type D:/i386 and click OK. (D: CD-Drive)
Insert disk
The file 'adpu160m.sys' on Adaptec Windows 2000 Family Manager set V1.12 S2 is needed.
Type the path where the file is located, and then click OK.
– If PROSet is already installed, uninstall the PROSet before upgrading.
If the teaming function is enabled, disable the function before uninstalling PROSet.
– During upgrade installation, [Disk Insert] dialog box may appear.
If it appears, click Cancel.
– When upgrade installation is completed, [Device Driver Wizard] dialog box may appear.
If it appears, click Cancel, then update the system.
To Next Page
Loading...
Need help?
General
