2-20 General Description
Press the Open/Close button on the front of the CD-ROM drive to eject the tray. With the CD-ROM label facing up,
place a CD-ROM in the tray gently and securely.
Press the Open/Close button or gently push on the tray front. The tray is automatically retracted into the CD-ROM
drive.
IMPORTANT: If the CD-ROM drive produces large noise after inserting a CD-ROM,
open the tray and reload the CD-ROM.
To remove a CD-ROM, press the Open/Close button to eject the tray, as described for inserting it, and then take the
CD-ROM out of the tray. (The orange-lit access lamp indicates ongoing disk access. The Open/Close button does not
work while the lamp is lit.)
Your OS may have a command to eject the tray.
When you have taken out the CD-ROM, retract the tray back in place.
To Next Page
Loading...
