4-16 Configuring Your Server
Option Parameter Description Your Setting
Parallel ATA Disabled
[Enabled]
Selects whether the parallel ATA is
enabled or disabled.
Serial ATA Disabled
[Enabled]
Selects whether the serial ATA is
enabled or disabled.
SATA Controller
Mode Option
[Compatible]
Enhanced
Compatible mode:
SATA and PATA drives are
automatically detected and
recognized as legacy mode.
Enhanced mode:
SATA and PATA drives are
automatically detected and
recognized as native mode.
Note: The pre-installed Windows 2000
does not work in enhanced mode.
SATA RAID Enabled [Disabled]
Enabled
Selects whether the RAID disk drives
that uses the onboard SATA is
enabled or disabled.
Note: If you attempt to start the
system from SATA hard disk drive with
different setting, the data may be
destroyed.
[ ]: Factory-set
To Next Page
Loading...
