Newtec Proprietary
Confidentiality: Unrestricted
V1.4
3/225
EU Compliancy Statements M6100 Broadcast Satellite Modulator
2.2 EMC Information
Relevant EMC information (to FCC rules)
This equipment has been tested and was found to comply with the limits for a class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and radiates radio frequency energy. If not installed and used in
accordance with the instruction manual, it may cause harmful interference to radio communications.
Note that, if coaxial cables are connected to the ASI-type interfaces, these cables
must be double shielded in order to keep the installation compliant with FCC rules.
Do not operate this equipment in a residential area, as it is likely to cause harmful interference.
When this is the case, you will be required to correct the interference at your own expense.
2.3 Restriction of Hazardous Substances Directive (RoHS)
(Directive 2011/65/EU)
The undersigned hereby confirms the following statement:
We hereby declare that this equipment is compliant to the RoHS Directive 2011/65/EU.
Done at St-Niklaas, on August 7, 2014
Serge Van Herck,
CEO
Newtec Cy N.V.
Laarstraat 5
B-9100 Sint-Niklaas
Belgium.
Tel: +32 (0)3 780 65 00
Fax: +32 (0)3 780 65 49
To Next Page
Loading...
