Newtec M6100 - Import Non-Linear Equalink File; Import the Linear Equalink File

Newtec Proprietary
Confidentiality: Unrestricted
V1.4
180/225
Features Descriptions M6100 Broadcast Satellite Modulator
12.9.2 Import Non-Linear Equalink™ File
In this menu it is possible to import the calculated predistortion file.
» Navigate to the Tasks Pane;
» Click Equalink;
» Click Import….;
» Select the Predistortion-type:
• Non-linear.
» Click Browse and select the correct file;
» Click Import.
When a new non-linear Equalink™ file is imported, the previous file is overwritten.
This is independent of the device configuration.
12.9.3 Import the Linear Equalink™ File
In this menu it is possible to import the calculated predistortion file.
» Navigate to the Tasks Pane (GUI).
» Click Equalink.
» Click Manual Import….
» Select the Predistortion-type:
• linear.
» Click Browse and select the correct file.
» Click Import.
When a new linear equalink file is imported, the linear equalink settings are updated in
the current configuration.
An explicit save is required!