Newtec M6100 - Automated Non-Linear Equalink Procedure

Newtec Proprietary
Confidentiality: Unrestricted
V1.4
186/225
Features Descriptions M6100 Broadcast Satellite Modulator
12.9.6 Automated Non-Linear Equalink™ Procedure
Also refer to the Automated Non Linear Equalink™ procedure. This document describes
the different calibration procedures depending on transponder settings (Fixed Gain Mode
or Automatic Level Control).
The procedure can be found on the CD-ROM that is delivered together with the device.
Use the following procedure to perform automated Non linear Equalink™ measurements.
» Login as expert user;
» Navigate to the Tasks Pane (GUI);
» Click Equalink;
» Click Automated Non-Linear;