Newtec M6100 - Colors Used in the GUI

Newtec Proprietary
Confidentiality: Unrestricted
V1.4
50/225
How to Manage the Device M6100 Broadcast Satellite Modulator
9.5.11 Colors Used in the GUI
In the schematic overview, colors are used per functional block to provide the status of the device.
The traffic flow is also indicated between the functional blocks by arrows.
The following colors are used for the functional blocks.
• Green: The device is working as expected;
• Orange:
– Device Management: Device redundancy is active and the device is in standby mode
Note: orange is only used by this functional block.
• Grey: This functional block is not active in the current configuration.
• Red: An alarm is present on the functional block;
The following colors are used for the process flow arrows:
• Black: Inactive, no data is transported;
• Green: Data is available on this part in the process flow (incoming, outgoing or transfer of data
within the device);
• Red: A problem exists on this part of the process flow.
For example: