Newtec Proprietary
Confidentiality: Unrestricted
V1.4
204/225
Features Descriptions M6100 Broadcast Satellite Modulator
12.11.8.3 Import a Configuration
• It is possible to edit an exported configuration file and define a new Session Word or a new
Injected ID in this file. When the changes are done, import the new configuration file into the
device(s).
12.11.8.4 Erasing the setupID
To erase the setup ID, it is possible to enter a zero value. This will result in the fact that a unique
setup ID is generated for that device. It will prevent copying any BISS key from that device to another
device. Backup of configuration on the same device is still possible through import/export of
configuration.
Trying to copy a config to or from a device with a setup ID equal to 0 will result in an error, unless it
is the same device.
Should the device be used in a redundancy setup, a new setup ID has to be entered.Should users
want to go back to the situation out of factory where BISS keys can be copied between devices, it is
necessary to perform a config reset. Config reset can be done via the GUI when going to the TAB
Device/Configurations. All config parameters are lost, but the device will behave again as out of
factory.
To Next Page
Loading...
