Newtec M6100 - DVB-S Specific Settings; Modulation and Coding; DVB-S2; S2 Extensions Specific Settings; Frame Type

Newtec Proprietary
Confidentiality: Unrestricted
V1.4
157/225
Features Descriptions M6100 Broadcast Satellite Modulator
Direct Spectrum
RF Frequency = LO Frequency + Output Frequency
Inverted Spectrum
RF Frequency = LO Frequency - Output Frequency
12.1.15 DVB-S Specific Settings
12.1.15.1 Modulation and Coding
Define the ModCod that can be used.
12.1.16 DVB-S2 / S2 Extensions Specific Settings
12.1.16.1 Frame Type
Select the Frame type
• Normal Frames (64800 bits);
• Short Frames (16200 bits).
This option is only available in the DVB-S2 standard.
DVB-S2 Extensions only supports normal frames.
DVB-S2 applies the error correction coding and the modulation to large frames of data called
baseband frames. A DVB-S2 baseband frame is either 16200 bits (short frames) or 64800 bits
(normal frames). The content of a frame can be a section of a transport stream, or any type of data,
framed or unframed (Generic Stream).
Note that the DVB-S2 standard specifies how to encapsulate transport streams into
Baseband frames, but not how to encapsulate IP data into baseband frames.