Newtec M6100 - 10.4 Software Upgrade

Newtec Proprietary
Confidentiality: Unrestricted
V1.4
89/225
General Device Settings and Actions M6100 Broadcast Satellite Modulator
10.4 Software Upgrade
A software upgrade is needed in two cases:
• To provide bug fixes and/or software enhancements;
• To activate a new functionality in the device.
The upgrade procedure is explained on the next page.
This activation/upgrade can require a license update as well. Refer to section:
LicenceFileonpage79 .
Depending on the ordered Care Pack the customer will be informed when a new
software release is available. For more information on the Care Pack please refer to
section:
Care Packs.
10.4.1 Software Upgrade Procedure
Use the applicable software upgrade file (installer.bin).
Proceed as follows to perform a software upgrade:
» Log in as operator or expert;
» Navigate to the Tasks Pane;
» Click Maintenance;
» Click Software Upgrade....
The following window opens:
» Browse to the folder where the "installer.bin file" is stored;