Newtec M6100 - Context Sensitive Help; Help

Newtec Proprietary
Confidentiality: Unrestricted
V1.4
64/225
How to Manage the Device M6100 Broadcast Satellite Modulator
9.7.4.2 Help
The help command is used to provide information on a command or parameter.
Always type help at the end.
For example:
[M6100] device # reset help
reset the device
Mandatory parameters:
* {enum}: Reset (default value = software) (possible enums are: hardware
software factory )
9.7.4.3 Context Sensitive Help "?"
This is used to provide possible completions.
When context sensitive help is used in a branch it displays all the possible commands, sub
branches, parameters and possible values.
Context sensitive help provides all possible completions when typing a command.
The question mark (?) is not shown in the interface.
The (?) can be replaced by pressing two times the TAB key.
For example display possible parameters:
[M6100] modulator# o?
outputfrequency
outputband
occupiedbandwidth
outputlevel
For example display possible values:
[M6100] modulator# rolloff set ?
set RollOff
Mandatory parameters:
* {enum}: Transmit filter roll-off factor. (default value = rolloff15) (possible
enums are: rolloff5 rolloff10 rolloff15 rolloff20 rolloff25 rolloff35 )