Newtec M6100 - Device Identification; Logging

Newtec Proprietary
Confidentiality: Unrestricted
V1.4
91/225
General Device Settings and Actions M6100 Broadcast Satellite Modulator
10.5 Device Identification
M6100 >Device >> Identification
This menu provides an overview of the general device identification. Use this part to:
• Enter a logical device label for easy recognition of the device in a system setup;
• Look up the following:
– Label;
– Serial number;
– Unique ID;
– Product;
– Type ID;
– Device Description;
– Type ID;
– Hardware Revision;
– Software ID;
– Software Version;
– Device options (displays the sales code and the code description)
This displays the current options of the device.
10.6 Logging
M6100 >Device Setup >> Logging
Enable or disable logging.
Logging can be performed on the following levels:
• Local device logging;
Log files can be exported or cleared, refer toExportorClearLogging.onpage93
• Remote logging using a remote syslog server (Syslog is a standardized mechanism for logging in
computer systems.).
When remote logging is enabled and a remote IP address is inserted all logging information is
forwarded to this address. The logging messages are packed in UDP (User Datagram Protocol) and
sent to a specific UDP port (514 according to the syslog standard).