Newtec M6100 - 14.3 TS over IP Alarms

Newtec Proprietary
Confidentiality: Unrestricted
V1.4
213/225
Appendix A - Alarm List M6100 Broadcast Satellite Modulator
14.3 TS over IP Alarms
Alarm Description
TS over IP General This alarm is raised when there is a general TS
over IP input alarm.
TS over IP No Input Data This alarm is raised when no input data is received
for the TS over IP functionality.
TS over IP Buffer Overflow This alarm is raised when the input data buffer of
TS over IP is full.
TS over IP Buffer Underflow This alarm is raised when the input data buffer is
below the minimum value.
TS over IP RTP No Sync This alarm is raised when no valid RTP input data
is received.
TS over IP Invalid TS Bit Rate This alarm is raised when the measured input TS
bit rate is higher/lower than the configured value.
(only relevant for a CBR Traffic profile)