Newtec Proprietary
Confidentiality: Unrestricted
V1.4
14/225
Introduction
M6100 Broadcast Satellite Modulator
6 Introduction
6.1 Short Description
The Newtec M6100 Boadcast Satellite Modulator is the new generation DVB-S2, DVB-DSNG and
DVB-S modulator specifically designed for broadcast direct-to-home, primary distribution to head
ends and contribution of television and radio content. The modulator supports the S2 Extensions to
achieve barrier-breaking efficiency.
The M6100 can be used in conjunction with set-top boxes; professional IRD’s or professional
satellite demodulators such as the MDM6100 and AZ910.
Delivering the Highest Uptime for Vital Links
Uptime and reliability are essential in the design of the modulator, taking a vital role in the satellite
network. Input source redundancy, and the shortest redundancy switch-over times of modulators,
operating both in 1+1 and N+1 topologies, are setting the standard in our industry.
Advanced capabilities such as a built-in MPEG Transport Stream analyzer, support of SMPTE 2022
FEC at the GbE inputs (for distributed IP head ends), and native support of Carrier ID according to
the new DVB standard as well as in the transport stream NIT table. Special care was taken to cope
with jittery transport stream over IP inputs. The six ASI ports allow for monitoring as well as
operational ASI ports.
Get the Best Performance and Lower your Costs
The Broadcast Satellite Modulator performs among the best, offering unmatched bandwidth
efficiency optimization options, thereby lowering overall Total Cost of Ownership. The fully
automated operation of the field-proven Equalink® pre-distortion technology is now available for any
satellite transmission application providing up to 10% bandwidth gains for single carrier per
transponder constellations.
Clean Channel Technology™, in combination with S2 Extensions, improves satellite efficiency by up
to 15%, thereby enabling much smaller carrier spacing.
Maximum symbol rates up to 72 Mbaud and modulations up to 64APSK (S2 extensions) combined
with VCM (Variable Coding and Modulation) allow for maximum throughput in large contribution
links. The availability of a DVB-S2 Mode Adaptation Input Interface (BaseBand Frames), combined
with Newtec’s AZ810 Stream Aggregator allows for the uplinking of up to 6 Transport Streams.
At the output of the Broadcast Satellite Modulator, the signal is available in IF or extended L-band
(950 MHz-2150 MHz), providing a compact and cost effective solution. A switchable 10 MHz
reference signal and optional 24V or 48V DC for an outdoor BUC is multiplexed on the L-band
interface.
The Broadcast Satellite Modulator can be easily monitored and controlled via a comprehensive front
panel menu, advanced web GUI, command line interface (CLI) as well as via SNMP protocol. This
enables easy integration into any industry-standard EMS/NMS system.
To Next Page
Loading...
