Newtec M6100 - Example: Set the Output Frequency; Example: Check the Alarms

Newtec Proprietary
Confidentiality: Unrestricted
V1.4
58/225
How to Manage the Device M6100 Broadcast Satellite Modulator
9.6.6 Example: Set the Output Frequency
» Select Modulator using the corresponding Soft Button;
» Navigate to Output Frequency;
» Click OK;
New value is displayed, indicating the current position by a blinking number.
» Insert the new value using the corresponding Soft Buttons;
» Click OK;
» The new value is displayed on the front panel.
9.6.7 Example: Check the Alarms
» Select Alarms using the corresponding Soft Button;
(use the soft button arrows to navigate through the root menu.)
» Navigate to Active Alarms or Memorized Alarms;
» Click OK;
» Navigate through the tree menu to see the active or Memorized alarms.
It is possible to clear the Memorized Alarms by pressing the OK button during three
seconds.