Newtec Proprietary
Confidentiality: Unrestricted
V1.4
216/225
Appendix A - Alarm List M6100 Broadcast Satellite Modulator
14.6 TS MUX Alarms
Alarms Description
TS MUX Local PID on Input This alarm is raised when a local generated packet is using a
PID, which already is available on the input of the device. In
case of error no data encapsulation will be supported.
TS MUX Signalling
Processing Error
This alarm is raised when a local generated table is using a
program number, which is already in use by the MPEG
stream. In an error case no data encapsulation will be
supported.
14.7 BISS Alarms
Alarms Description
BISS PAT Error This alarm is raised when the CRC of the PAT is not valid.
BISS PMT Error This alarm is raised when the CRC of the PMT is not valid.
BISS CAT Error This alarm is raised when the CRC of the CAT is not valid.
BISS Already Scrambled This alarm is raised when a packet of a program is already
scrambled
ISS CA Descriptor Found On
Input
This alarm is raised when a CA descriptor is found on input.
BISS Scrambling Error This alarm is raised when errors are happening in the
scrambling core.
BISS SW Refused Error This alarm is raised when the session words are changing too
rapidly while scrambling is active.
BISS General This alarm is raised when there is a general Biss error.
To Next Page
Loading...
