Newtec M6100 - Page 149

Newtec Proprietary
Confidentiality: Unrestricted
V1.4
141/225
Data Interfaces M6100 Broadcast Satellite Modulator
Parameter Description
Classification
Name
Enter a logical classification name/rule.
Enable Activate the classification rule.
Classification
Expression
It is possible to define an expression to classify/filter out specific traffic. This
expression can be standalone or combined with the Network Address (see
previous parameter).
Note that the syntax of the expression is being checked while typing.
Refer to appendix AppendixC-ClassificationExpressionsonpage221 to get an
overview of the possible expressions.
Shaping Node
Name
Enter the node name to which the classified traffic belongs.
The Node Name must match with the Node Name defined in the Traffic
Shaping Menu.
Matching Order The matching order defines the order in which packets are processed by the
classification rules. This is important for disambiguation when multiple
classification rules match the same packet.
The order ranges from 1 (match first) to 99 (match last).