Newtec M6100 - Page 68

Newtec Proprietary
Confidentiality: Unrestricted
V1.4
60/225
How to Manage the Device M6100 Broadcast Satellite Modulator
Craft Interface
To access the CLI via the craft interface do the following:
» Configure the line settings of the serial port as follows:
• Speed 115200 baud;
• Eight data bits;
• No parity bit;
• One stop bit.
» Make an connection between the managing device and the M6100 Boadcast Satellite Modulator.
For more information please refer to section: CraftInterfaceonpage24 .