Omron 3G3RX - Page 399

App-4
Appendix-1 Parameter List
Appendix
Basic Function Mode (F)
Parameter
No.
Function name Monitor or data range
Default
setting
Changes
during
operation
Unit Page
F001
Output frequency
setting/monitor
[SetFrequency
(TM)]
0.0/Starting frequency to 1st/2nd/3rd max.
frequency
0.00 to 400.00
0.00 Yes Hz 4-8
F002
Acceleration time 1
[Accel.time1]
0.01 to 3600.00 10.00 Yes s 4-8
F202
* 2nd acceleration
time 1
[Accel.time1-M2]
0.01 to 3600.00 10.00 Yes s 4-8
F302
* 3rd acceleration
time 1
[Accel.time1-M3]
0.01 to 3600.00 10.00 Yes s 4-8
F003
Deceleration time 1
[Decel.time1]
0.01 to 3600.00 10.00 Yes s 4-8
F203
* 2nd deceleration
time 1
[Decel.time1-M2]
0.01 to 3600.00 10.00 Yes s 4-8
F303
* 3rd deceleration
time 1
[Decel.time1-M3]
0.01 to 3600.00 10.00 Yes s 4-8
F004
Operator rotation
direction selection
[Run key direction]
00: FWD (Forward)
01: REV (Reverse)
00 No  4-9
* 2nd/3rd control is displayed when "SET(08)/SET3(17)" is allocated to one of multi-function inputs from C001
to C008.