Section 5 Object Operations 5-7 Address Settings
NS-Designer Operation Manual NS-Designer Operation Manual NS-Designer Operation Manual
Use 3 onwards when adding new hosts to the imported CSV file. Numbers 1 and 2 are reserved for the
following communications settings.
1 Serial port A
2 Serial port B
Note
♦ When CSV files are edited using spreadsheet software, a message warning that some changes
may be lost if the file is saved in the current format may be displayed when the file is closed. This
will not adversely affect PT operation.
♦ Serial ports A and B can only be added or deleted under Settings – System Setting. Serial ports A
and B cannot be added by importing CSV files. Serial port A and B information is not output when
CSV files are exported.
N
N
o
o
t
t
e
e
5-41
To Next Page
Loading...
