Section 10 Transferring Data 10-1 Transferring Data to the PT
NS-Designer Operation Manual
Even if the No Button is selected, the confirmation message shown below will be displayed when
exiting the Screen Data Transfer Dialog Box. If the Yes Button is clicked, the PT will be restarted. If
the No Button is clicked, it will become necessary to restart the PT directly. To return to the Screen
Data Transfer Dialog Box, click the CANCEL Button.
Note
♦
If a communications error occurs or the PT cannot read the transferred data normally and an error
occurs, perform data transfer again from the beginning.
N
N
o
o
t
t
e
e
10-28
To Next Page
Loading...
