Section 13 Multi-language Display 13-2 Creating Multi-language Display Screens
NS-Designer Operation Manual NS-Designer Operation Manual NS-Designer Operation Manual
Setting the Input Locale for Western European Languages
The windows shown in the following explanations are for Windows 2000.
1. Open Control Panel – Regional Options and select the Input Locales Tab Page. Click the Add
Button.
• In Windows XP, open Control Panel – Regional Options and select the Languages Tab
Page. Click the Details Button under Text services and input languages.
2. The following window will be displayed. Select the language to be input under Input locale (Input
language in Windows XP) and click the OK Button.
3. Switch between input locales is automatically set under Hot keys for input locales. Also the Enable
indicator on taskbar option at the bottom of the window is automatically selected. If the setting is
None, change the setting with the Change Key Sequence Button (Key Settings Button in Win-
dows XP).
13-3
To Next Page
Loading...
