eration Manual
Message Countermeasure
Sheet page No. is out of range. Set a num-
ber from 0 to 9.
Set the sheet page number to a number between 0
and 9.
Specified file name contains invalid charac-
ters:
Alphanumeric (A-Z,a-z,0-9), underscore
(_), dollar mark ($), and period (,).
The specified file name contains illegal characters.
Change the file name to one that uses only the follow-
ing characters.
Alphanumerics (A-Z, a-z, 0-9), underscores (_), dollar
signs ($), and periods (.).
Specify the file name within 12 characters
(8+3 format).
Specify a file name of 12 characters or less (8+3 for-
mat) when specifying file names in dialog boxes used
to set properties, e.g., when making list selections.
Start address is larger than the end ad-
dress.
Set the start address so that it is smaller than the end
address.
Start address is not set. Correctly designate the start address for replacement
in the Replace Dialog Box.
Start address setting is not correct. Set a correct address.
Start page No. is out of range. Set a num-
ber from 0 to 3999.
Screen page numbers must be set in the range 0 to
3,999.
Set the screen page number to a number between 0
and 3,999.
Test Tool is already started up. Cannot
start Test.
Stop the test tool and then restart it.
The address is out of range. Set an address that is within range in the Address Dia-
log Box.
The capacity of NS hardware is insufficient.
Transmission failed.
Reduce the amount of screen data and transfer the
project again.
The data is created with NS-Designer Ver.
1.0. This needs to be converted to edit with
NS-Designer Ver. 6.2. When you convert
the data to NS-Designer V1.1, it also can
be operated with the system version 1.0.
Do you want to convert the data?
You are attempting to use NS-Designer Ver. 6.2 to edit
a project that was saved using NS-Designer Ver. 1.0.
To convert the data from Ver. 1.0 to Ver. 1.1, which
can be edited using NS-Designer Ver. 6.2, click the
Yes Button. To leave the data unconverted, click the
No Button and edit the project using NS-Designer Ver.
1.0.
The file name is incorrect. Input correct file
name.
Input a file name in the correct format.
The number of characters exceed the limit.
Set characters no more than X characters.
Set no more than the specified number of characters.
The object that cannot be arranged on the
pop-up screen is contained.
Screens with video display objects or data block tables
cannot be converted to pop-up screens. Either delete
the video display objects and data block tables or do
not perform the pop-up screen setting.
The selected PT model and System Ver-
sion do NOT match.
Select a PT model and System Version that match.
Refer to Appendix 9 Converting Data between Different
Versions of NS-series Products for details on sup-
ported combinations.
The setting data format is different. Check the data block field storage format and the set-
ting data format.
The start sheet number is out of range. Set
a number from 0 to 9.
Sheet screen page numbers must be set in the range 0
to 9.
Set the sheet screen page number to a number be-
tween 0 and 9.
The value is out of range. Input a value within the correct range.
The version of CSV file is newer than the
project you are editing. Import CSV file
cannot be performed.
Check the NS-Designer version being used, upgrade
to match the version of the CSV file, as required, and
then import the CSV file again.
To Next Page
Loading...
