Section 3 Manipulating Project Files 3-8 Project Maintenance
NS-Designer Operation Manual
Delete
1. Select the Delete Tab.
2. Sets the project to be deleted.
1
No. Item Details
1 Delete Project Set the name of the project file to be deleted as a full path name.
3. Click the Execute Button to display the Confirmation Dialog Box. Click the Yes Button to delete the
project.
Reference
♦ Projects being edited cannot be deleted. Close the project first, and then retry the operation.
♦ Projects that have been deleted cannot be restored. Check the project carefully before deleting it.
R
R
e
e
f
f
e
e
r
r
e
e
n
n
c
c
e
e
Backup
1. Select the Backup Ta b.
2. Set the project to be backed up.
1
2
No. Item Details
1 Backup
Project
Sets the name of the project file to be backed up as a full path name. When the
NS-Designer is used to open the project, the project file is displayed automatically.
2 Backup To When a floppy disk is selected, the backup file will be saved on the floppy disk. Prepare
the specified number of 1.44-Mbyte floppy disks. When a folder is selected, the backup file
will be saved in the folder. A file is created at the backup destination under the name
[project name].XXX (XXX = 000, 001, …).
3-14
To Next Page
Loading...
Need help?
General
