83
Setting the NV Configuration from the NV-Designer Section 6-2
Setting Up Auto-Paging Select the On Option for Auto-Paging and click the Setup Button. The Auto-
Paging Dialog Box will be displayed. Set the screen number, time, and jump
destination, then click the Save Button.
Item Description
1 Screen No. Enter the number of the screen to switch to automatically
within the range given in parentheses.
2 Time Sets the time the switched screen is displayed. It can be
set to between 1 and 255 seconds.
3 Jump to Sets the screen number to switch to.
4 Settings Display
Area
Sets up auto-paging.
5 OK Button Closes the Auto-Paging Dialog Box and returns to the
Auto-Paging Tab Page.
6 Delete Button Deletes the screens saved in auto-paging.
7 Save Button Saves the settings.
1
2
3
5
6
7
4
To Next Page
Loading...
