37
NV-Designer Configuration Section 3-3
3-3-8 Language Tab Page
This tab page sets the language to use by default.
Setting Description
Default Character
Set
Sets the default language when parts are pasted from a parts
library.
It can be chosen from Japanese, English, Simplified Chinese,
Traditional Chinese, Korean, or Turkish.
For example, even if the menu and dialog boxes are displayed
in Japanese, you can set the characters on the parts to be dis-
played in English or European English.
Menu and Dialog
Language
Sets the language displayed in the menus and dialog boxes.
It can be chosen from Japanese, English, Korean, Simplified
Chinese, or Traditional Chinese.
Multi-Language
Exchange
Sets whether to enable or disable the display language switch-
ing function. If switching the display language is enabled, Multi
Language Exchange String List – Edit Properties can be
selected from the PT Menu.
If switching the display language is enabled, a dialog box to
edit character strings for switching display languages will be
displayed to let you select the language for each language
number.
You can register the language and corresponding character
string for each part in advance and then change all registered
parts at the same time using a function switch or a command
from the PLC.
Additional Information
To change the display, the NV-Designer must be restarted.
The set language will be enabled when the NV-Designer is restarted. Restart the
NV-Designer.
To Next Page
Loading...
