2
NV-Designer Features Section 1-1
1-1 NV-Designer Features
The NV-series Programmable Terminals (PTs) are easy to operate and com-
pact.
1-1-1 NV-Designer Features and Functions
The NV-Designer is a programming application used to create screens for NV-
series PTs.
Design Screens Easily Like a Paint Application
The NV-Designer can be used to transfer screens to and data from an NV-
series PT, to print data, and to perform other operations.
Drag and Drop Parts to the Screen
The libraries contain various “parts,” such as bit switches that allow you to turn
PLC I/O points ON and OFF by touching the bit switch, data parts for display-
ing PLC data, and keyboard parts that can rewrite PLC data.
Parts can be easily positioned by dragging and dropping them to the screen.
Easy to Register Original Parts
Custom parts created by the user can be dragged and dropped to a library to
be registered and used like normal parts.
Easy to Print Design Status and Settings
Screen previews can be printed together with the properties of the edited
base screen and edited part attributes.
To Next Page
Loading...
