ix
About this Manual
This manual describes how to create screens for and maintain the NV-series PTs using the NV-
Designer and includes the sections described below.
Please read this manual carefully and be sure you understand the information provided before
attempting to use the NV-Designer. Be sure to read the precautions provided in the following section.
Precautions
This section provides general precautions for using the NV-series PTs and related devices.
Section 1 Overview
This section introduces the features and functions of the NV-Designer.
Section 2 PT Internal Data Structure and Display Methods
This section describes the internal data structure of an NV-series PT, how to control the screens dis-
played on the PT, and how to control the backlight.
Section 3 NV-Designer Outline and Configuration
This section gives the system requirements for running the NV-Designer, describes the windows and
menus of the NV-Designer, and explains the parameters in the NV-Designer Configuration.
Section 4 Overall Flow of NV-Designer Operation
This section describes the overall procedure for using the NV-Designer to set up an NV-series PT for
operation.
Section 5 Creating and Saving Projects (Including Screen Data)
This section describes how to create, save, and manipulate projects for NV-series PTs, including
operations that can be performed between projects.
Section 6 NV Configuration
This section describes the parameters in the NV Configuration in detail.
Section 7 Descriptions of Parts
This section describes how to create screens using the various parts provided by the NV-Designer.
Section 8 Using PT Functions
This section describes special functions that can be used with NV-series PTs and the NV-Designer.
Section 9 Transferring Screens
This section describes how to transfer screens to and from an NV-series PT using both communica-
tions and SD memory cards.
Appendix
The appendix describes how to use the NV Memory Editor, which allow you to edit the internal mem-
ory of the PT from the NV-Designer.
To Next Page
Loading...
