Omron NV Series - Creating a Simple Screen; Starting the NV-Designer

41
Creating a Simple Screen Section 4-2
4-2 Creating a Simple Screen
This section describes how to create a simple screen and operate it.
Screen to be created:
4-2-1 Starting the NV-Designer
When the NV-Designer is started, select the PT model and the PLC it con-
nects to.
1,2,3... 1. Select Program – OMRON – CX-One – NV-Designer to start the NV-De-
signer.
2. Select Create New Project from the Start Menu and click the OK Button.
Text
Screen 0
Function
switch
Text
Data part
Accessed address: D100
Text
Lamp
Accessed address: W100.0
0
Function switch
Return to previous screen
Change to
screen 1
Screen 1